| Version 1 (modified by , 14 years ago) (diff) |
|---|
The Trac Configuration File
Table of Contents
Trac configuration is done by editing the trac.ini config file, located in <projectenv>/conf/trac.ini. Changes to the configuration are usually reflected immediately, though changes to the [components] or [logging] sections will require restarting the web server. You may also need to restart the web server after creating a global configuration file when none was previously present.
The trac.ini configuration file should be writable by the web server, as Trac currently relies on the possibility to trigger a complete environment reload to flush its caches.
Global Configuration
In versions prior to 0.11, the global configuration was by default located in $prefix/share/trac/conf/trac.ini or /etc/trac/trac.ini, depending on the distribution. If you're upgrading, you may want to specify that file to inherit from. Literally, when you're upgrading to 0.11, you have to add an [inherit] section to your project's trac.ini file. Additionally, you have to move your customized templates and common images from $prefix/share/trac/... to the new location.
Global options will be merged with the environment-specific options, where local options override global options. The options file is specified as follows:
[inherit] file = /usr/share/trac/conf/trac.ini
Note that you can also specify a global option file when creating a new project, by adding the option --inherit=/path/to/global/options to trac-admin's initenv command. If do not do this but nevertheless intend to use a global option file with your new environment, you will have to go through the newly generated conf/trac.ini file and delete the entries that will otherwise override those set in the global file.
Reference
This is a brief reference of available configuration options.
Note that the [bitten], [spam-filter] and [vote] sections below are added by plugins enabled on this Trac, and therefore won't be part of a default installation.
[account-manager]
account_changes_notify_addresses | List of email addresses that get notified of user changes, ie, new user, password change and delete user. | (no default) |
allow_delete_account | Allow users to delete their own account. | enabled |
auth_init | Launch an initial Trac authentication setup. | enabled |
cookie_refresh_pct | Persistent sessions randomly get a new session cookie ID with likelihood in percent per work hour given here (zero equals to never) to decrease vulnerability of long-lasting sessions. | 10 |
db_htdigest_realm | Realm to select relevant htdigest db entries | (no default) |
environ_auth_overwrite | Whether environment variable REMOTE_USER should get overwritten after processing login form input. Otherwise it will only be set, if unset at the time of authentication. | enabled |
force_passwd_change | Force the user to change password when it's reset. | enabled |
generated_password_length | Length of the randomly-generated passwords created when resetting the password for an account. | 8 |
htdigest_file | Path relative to Trac environment or full host machine path to password file | (no default) |
htdigest_realm | Realm to select relevant htdigest file entries | (no default) |
login_opt_list | Set to True, to switch login page style showing alternative actions in a single listing together. | disabled |
notify_actions | Comma separated list of actions to notify of. Available actions 'new', 'change', 'delete'. | (no default) |
password_store | Ordered list of password stores, queried in turn. | (no default) |
persistent_sessions | Allow the user to be remembered across sessions without needing to re-authenticate. This is, user checks a "Remember Me" checkbox and, next time he visits the site, he'll be remembered. | disabled |
refresh_passwd | Re-set passwords on successful authentication. This is most useful to move users to a new password store or enforce new store configuration (i.e. changed hash type), but should be disabled/unset otherwise. | disabled |
register_check | Ordered list of IAccountRegistrationInspector's to use for registration checks. | BasicCheck,EmailCheck,BotTrapCheck,RegExpCheck,UsernamePermCheck |
reset_password | Set to False, if there is no email system setup. | enabled |
username_char_blacklist | Always exclude some special characters from usernames. This is enforced upon new user registration. | :[] |
[attachment]
max_size | Maximum allowed file size (in bytes) for attachments. | 262144 |
max_zip_size |
Maximum allowed total size (in bytes) for an attachment list to be
downloadable as a | 2097152 |
render_unsafe_content | Whether attachments should be rendered in the browser, or only made downloadable. Pretty much any file may be interpreted as HTML by the browser, which allows a malicious user to attach a file containing cross-site scripting attacks. For public sites where anonymous users can create attachments it is recommended to leave this option disabled. | disabled |
[browser]
oneliner_properties | Comma-separated list of version control properties to render as oneliner wiki content in the repository browser. | trac:summary |
wiki_properties | Comma-separated list of version control properties to render as wiki content in the repository browser. | trac:description |
[changeset]
max_diff_bytes | Maximum total size in bytes of the modified files (their old size plus their new size) for which the changeset view will attempt to show the diffs inlined. | 10000000 |
max_diff_files | Maximum number of modified files for which the changeset view will attempt to show the diffs inlined. | 0 |
wiki_format_messages | Whether wiki formatting should be applied to changeset messages. If this option is disabled, changeset messages will be rendered as pre-formatted text. | enabled |
[components]
This section is used to enable or disable components
provided by plugins, as well as by Trac itself. The component
to enable/disable is specified via the name of the
option. Whether its enabled is determined by the option value;
setting the value to enabled or on will enable the
component, any other value (typically disabled or off)
will disable the component.
The option name is either the fully qualified name of the components or the module/package prefix of the component. The former enables/disables a specific component, while the latter enables/disables any component in the specified package/module.
Consider the following configuration snippet:
[components] trac.ticket.report.ReportModule = disabled acct_mgr.* = enabled
The first option tells Trac to disable the
report module.
The second option instructs Trac to enable all components in
the acct_mgr package. Note that the trailing wildcard is
required for module/package matching.
To view the list of active components, go to the Plugins
page on About Trac (requires CONFIG_VIEW
permissions).
See also: TracPlugins
[fullblog]
all_rss_icons | Controls whether or not to display rss icons more than once | disabled |
archive_rss_icon | Controls whether or not to display the rss icon | enabled |
default_postname |
Option for a default naming scheme for new posts. The string
can include substitution markers for time (UTC) and user: %Y=year,
%m=month, %d=day, %H=hour, %M=minute, %S=second, $USER.
Example template string: | (no default) |
month_names |
Ability to specify a list of month names for display in groupings.
If empty it will make a list from default locale setting.
Enter list of 12 months like:
| (no default) |
num_items_front | Option to specify how many recent posts to display on the front page of the Blog (and RSS feeds). | 20 |
personal_blog | When using the Blog as a personal blog (only one author), setting to 'True' will disable the display of 'Browse by author:' in sidebar, and also removes various author links and references. | disabled |
[googlesitemap]
change_frequency | Change frequency of URLs. Valid values: always, hourly, daily, weekly, monthly, yearly, never. Disabled if empty. | (no default) |
compress_sitemap | Send sitemap compressed. Useful for larger sitemaps. | disabled |
compression_level | Compression level. Value range: 1 (low) to 9 (high). Default: 6 | 6 |
ignore_users | Do not list wiki pages from this users (default: "trac") | trac |
ignore_wikis | List of wiki pages to not be included in sitemap | (no default) |
list_realms | Which realms should be listed. Supported are "wiki", "blog", and "ticket". | wiki,ticket,blog |
sitemappath |
Path of sitemap relative to Trac main URL (default: "sitemap.xml"). If this path ends in | sitemap.xml |
[header_logo]
alt | Alternative text for the header logo. | (please configure the [header_logo] section in trac.ini) |
height | Height of the header logo image in pixels. | -1 |
link | URL to link to, from the header logo. | (no default) |
src | URL of the image to use as header logo. It can be absolute, server relative or relative.
If relative, it is relative to one of the | site/your_project_logo.png |
width | Width of the header logo image in pixels. | -1 |
[hg]
encoding | Encoding that should be used to decode filenames, file content, and changeset metadata. If multiple encodings are used for these different situations (or even multiple encodings were used for filenames), simply specify a list of encodings which will be tried in turn (since 0.12.0.24). | utf-8 |
hgrc | Optional path to an hgrc file which will be used to specify extra Mercurial configuration options (see http://www.selenic.com/mercurial/hgrc.5.html). | (no default) |
node_format | Specify how the commit SHA1 hashes should be displayed. Possible choices are: 'short', the SHA1 hash is abbreviated to its first 12 digits, or 'hex', the hash is shown in full. | short |
show_rev | Show decimal revision in front of the commit SHA1 hash. While this number is specific to the particular clone used to browse the repository, this can sometimes give an useful hint about the relative "age" of a revision. | enabled |
[http-headers]
Headers to be added to the HTTP request. (since 1.2.3)
The header name must conform to RFC7230 and the following reserved names are not allowed: content-type, content-length, location, etag, pragma, cache-control, expires.
[inherit]
htdocs_dir | Path to the shared htdocs directory. Static resources in that directory are mapped to /chrome/shared under the environment URL, in addition to common and site locations. This can be useful in site.html for common interface customization of multiple Trac environments.
Non-absolute paths are relative to the Environment | (no default) |
plugins_dir | Path to the shared plugins directory.
Plugins in that directory are loaded in addition to those in
the directory of the environment
Non-absolute paths are relative to the Environment | (no default) |
templates_dir | Path to the shared templates directory.
Templates in that directory are loaded in addition to those in the
environments
Non-absolute paths are relative to the Environment | (no default) |
[intertrac]
This section configures InterTrac prefixes. Options in this section
whose name contain a . define aspects of the InterTrac prefix
corresponding to the option name up to the .. Options whose name
don't contain a . define an alias.
The .url is mandatory and is used for locating the other Trac.
This can be a relative URL in case that Trac environment is located
on the same server.
The .title information is used for providing a useful tooltip when
moving the cursor over an InterTrac link.
Example configuration:
[intertrac] # -- Example of setting up an alias: t = trac # -- Link to an external Trac: trac.title = Edgewall's Trac for Trac trac.url = http://trac.edgewall.org
[interwiki]
Every option in the [interwiki] section defines one InterWiki
prefix. The option name defines the prefix. The option value defines
the URL, optionally followed by a description separated from the URL
by whitespace. Parametric URLs are supported as well.
Example:
[interwiki] MeatBall = http://www.usemod.com/cgi-bin/mb.pl? PEP = http://www.python.org/peps/pep-$1.html Python Enhancement Proposal $1 tsvn = tsvn: Interact with TortoiseSvn
[logging]
log_file |
If | trac.log |
log_format | Custom logging format. If nothing is set, the following will be used:
In addition to regular key names supported by the Python logger library one could use:
Note the usage of
Example:
| (no default) |
log_level | Level of verbosity in log.
Should be one of ( | DEBUG |
log_type | Logging facility to use.
Should be one of ( | none |
[mainnav]
Configures the main navigation bar, which by default contains Wiki, Timeline, Roadmap, Browse Source, View Tickets, New Ticket, Search and Admin.
The label, href, and order attributes can be specified. Entries
can be disabled by setting the value of the navigation item to
disabled.
The following example renames the link to WikiStart to Home, links the View Tickets entry to a specific report and disables the Search entry.
[mainnav] wiki.label = Home tickets.href = /report/24 search = disabled
See TracNavigation for more details.
[metanav]
Configures the meta navigation
entries, which by default are Login, Logout, Preferences,
Help/Guide and About Trac. The allowed attributes are the
same as for [mainnav]. Additionally, a special entry is supported -
logout.redirect is the page the user sees after hitting the logout
button. For example:
[metanav] logout.redirect = wiki/Logout
See TracNavigation for more details.
[milestone]
default_group_by | Default field to use for grouping tickets in the grouped progress bar. (since 1.2) | component |
default_retarget_to | Default milestone to which tickets are retargeted when closing or deleting a milestone. (since 1.1.2) | (no default) |
stats_provider |
Name of the component implementing | DefaultTicketGroupStatsProvider |
[milestone-groups]
As the workflow for tickets is now configurable, there can be many ticket states, and simply displaying closed tickets vs. all the others is maybe not appropriate in all cases. This section enables one to easily create groups of states that will be shown in different colors in the milestone progress bar.
Note that the groups can only be based on the ticket status, nothing else. In particular, it's not possible to distinguish between different closed tickets based on the resolution.
Example configuration with three groups, closed, new and active (the default only has closed and active):
# the 'closed' group correspond to the 'closed' tickets
closed = closed
# .order: sequence number in the progress bar
closed.order = 0
# .query_args: optional parameters for the corresponding
# query. In this example, the changes from the
# default are two additional columns ('created' and
# 'modified'), and sorting is done on 'created'.
closed.query_args = group=resolution,order=time,col=id,col=summary,col=owner,col=type,col=priority,col=component,col=severity,col=time,col=changetime
# .overall_completion: indicates groups that count for overall
# completion percentage
closed.overall_completion = true
new = new
new.order = 1
new.css_class = new
new.label = new
# Note: one catch-all group for other statuses is allowed
active = *
active.order = 2
# .css_class: CSS class for this interval
active.css_class = open
# .label: displayed label for this group
active.label = in progress
The definition consists in a comma-separated list of accepted status. Also, '*' means any status and could be used to associate all remaining states to one catch-all group.
The CSS class can be one of: new (yellow), open (no color) or
closed (green). Other styles can easily be added using custom
CSS rule: table.progress td.<class> { background: <color> }
to a site/style.css file
for example.
[mimeviewer]
max_preview_size | Maximum file size for HTML preview. | 262144 |
mime_map | List of additional MIME types and keyword mappings. Mappings are comma-separated, and for each MIME type, there's a colon (":") separated list of associated keywords or file extensions. | text/x-dylan:dylan,text/x-idl:ice,text/x-ada:ads:adb |
mime_map_patterns | List of additional MIME types associated to filename patterns. Mappings are comma-separated, and each mapping consists of a MIME type and a Python regexp used for matching filenames, separated by a colon (":"). (since 1.0) | text/plain:README(?!\.rst)|INSTALL(?!\.rst)|COPYING.* |
pygments_default_style | The default style to use for Pygments syntax highlighting. | trac |
pygments_modes | List of additional MIME types known by Pygments.
For each, a tuple | (no default) |
tab_width | Displayed tab width in file preview. | 8 |
treat_as_binary | Comma-separated list of MIME types that should be treated as binary data. | application/octet-stream,application/pdf,application/postscript,application/msword,application/rtf |
[notification]
admit_domains | Comma-separated list of domains that should be considered as valid for email addresses (such as localdomain). | (no default) |
ambiguous_char_width | Width of ambiguous characters that should be used in the table of the notification mail.
If | single |
batch_subject_template |
Like | ${prefix} Batch modify: ${tickets_descr} |
default_format.email | Default format to distribute email notifications. | text/plain |
email_address_resolvers | Comma separated list of email resolver components in the order they will be called. If an email address is resolved, the remaining resolvers will not be called. | SessionEmailResolver |
email_sender |
Name of the component implementing
This component is used by the notification system to send emails.
Trac currently provides | SmtpEmailSender |
ignore_domains | Comma-separated list of domains that should not be considered part of email addresses (for usernames with Kerberos domains). | (no default) |
message_id_hash | Hash algorithm to create unique Message-ID header. (since 1.0.13) | md5 |
mime_encoding | Specifies the MIME encoding scheme for emails.
Supported values are: | none |
sendmail_path | Path to the sendmail executable.
The sendmail program must accept the
| sendmail |
smtp_always_bcc | Comma-separated list of email addresses to always send notifications to. Addresses are not public (Bcc:). | (no default) |
smtp_always_cc | Comma-separated list of email addresses to always send notifications to. Addresses can be seen by all recipients (Cc:). | (no default) |
smtp_default_domain | Default host/domain to append to addresses that do not specify one. Fully qualified addresses are not modified. The default domain is appended to all username/login for which an email address cannot be found in the user settings. | (no default) |
smtp_enabled | Enable email notification. | disabled |
smtp_from | Sender address to use in notification emails.
At least one of | trac@localhost |
smtp_from_author |
Use the author of the change as the sender in notification emails
(e.g. reporter of a new ticket, author of a comment). If the
author hasn't set an email address, | disabled |
smtp_from_name | Sender name to use in notification emails. | (no default) |
smtp_password | Password for authenticating with SMTP server. | (no default) |
smtp_port | SMTP server port to use for email notification. | 25 |
smtp_replyto | Reply-To address to use in notification emails.
At least one of | trac@localhost |
smtp_server | SMTP server hostname to use for email notifications. | localhost |
smtp_subject_prefix | Text to prepend to subject line of notification emails.
If the setting is not defined, then | __default__ |
smtp_user | Username for authenticating with SMTP server. | (no default) |
ticket_subject_template | A Genshi text template snippet used to get the notification subject. The template variables are documented on the TracNotification page. | ${prefix} #${ticket.id}: ${summary} |
use_public_cc | Addresses in the To and Cc fields are visible to all recipients. If this option is disabled, recipients are put in the Bcc list. | disabled |
use_short_addr | Permit email address without a host/domain (i.e. username only).
The SMTP server should accept those addresses, and either append
a FQDN or use local delivery. See also | disabled |
use_tls | Use SSL/TLS to send notifications over SMTP. | disabled |
[notification-subscriber]
The notifications subscriptions are controlled by plugins. All
INotificationSubscriber components are in charge. These components
may allow to be configured via this section in the trac.ini file.
See TracNotification for more details.
Available subscribers:
| Subscriber | Description |
|---|---|
AlwaysEmailSubscriber | |
CarbonCopySubscriber | Ticket that I'm listed in the CC field is modified |
NewTicketSubscriber | Any ticket is created |
TicketOwnerSubscriber | Ticket that I own is created or modified |
TicketPreviousUpdatersSubscriber | Ticket that I previously updated is modified |
TicketReporterSubscriber | Ticket that I reported is modified |
TicketUpdaterSubscriber | I update a ticket |
[project]
admin | E-Mail address of the project's administrator. | (no default) |
admin_trac_url | Base URL of a Trac instance where errors in this Trac should be reported. This can be an absolute or relative URL, or '.' to reference this Trac instance. An empty value will disable the reporting buttons. | . |
descr | Short description of the project. | My example project |
footer | Page footer text (right-aligned). | Visit the Trac open source project at<br /><a href="http://trac.edgewall.org/">http://trac.edgewall.org/</a> |
icon | URL of the icon of the project. | common/trac.ico |
name | Name of the project. | My Project |
url |
URL of the main project web site, usually the website in
which the | (no default) |
[pygments-lexer]
Configure Pygments lexer options.
For example, to set the
PhpLexer options
startinline and funcnamehighlighting:
[pygments-lexer] php.startinline = True php.funcnamehighlighting = True
The lexer name is derived from the class name, with Lexer stripped
from the end. The lexer short names can also be used in place
of the lexer name.
[repositories]
One of the alternatives for registering new repositories is to
populate the [repositories] section of the trac.ini.
This is especially suited for setting up convenience aliases, short-lived repositories, or during the initial phases of an installation.
See TracRepositoryAdmin for details about the format adopted for this section and the rest of that page for the other alternatives.
(since 0.12)
[revisionlog]
default_log_limit | Default value for the limit argument in the TracRevisionLog. | 100 |
graph_colors | Comma-separated list of colors to use for the TracRevisionLog graph display. (since 1.0) | #cc0,#0c0,#0cc,#00c,#c0c,#c00 |
[search]
default_disabled_filters |
Specifies which search filters should be disabled by
default on the search page. This will also restrict the
filters for the quick search function. The filter names
defined by default components are: | (no default) |
min_query_length | Minimum length of query string allowed when performing a search. | 3 |
[svn]
authz_file |
The path to the Subversion
authorization (authz) file.
To enable authz permission checking, the | (no default) |
authz_module_name |
The module prefix used in the | (no default) |
[theme]
enable_css | Enable or disable custom CSS from theme. | disabled |
theme | The theme to use to style this Trac. | default |
[ticket]
allowed_empty_fields |
Comma-separated list of | milestone,version |
commit_ticket_update_check_perms | Check that the committer has permission to perform the requested operations on the referenced tickets. This requires that the user names be the same for Trac and repository operations. | enabled |
commit_ticket_update_commands.close | Commands that close tickets, as a space-separated list. | close closed closes fix fixed fixes |
commit_ticket_update_commands.refs | Commands that add a reference, as a space-separated list.
If set to the special value | addresses re references refs see |
commit_ticket_update_envelope | Require commands to be enclosed in an envelope.
Must be empty or contain two characters. For example, if set to | (no default) |
commit_ticket_update_notify | Send ticket change notification when updating a ticket. | enabled |
default_cc | Default cc: list for newly created tickets. | (no default) |
default_component | Default component for newly created tickets. | (no default) |
default_description | Default description for newly created tickets. | (no default) |
default_keywords | Default keywords for newly created tickets. | (no default) |
default_milestone | Default milestone for newly created tickets. | (no default) |
default_owner | Default owner for newly created tickets. | < default > |
default_priority | Default priority for newly created tickets. | major |
default_resolution | Default resolution for resolving (closing) tickets. | fixed |
default_severity | Default severity for newly created tickets. | (no default) |
default_summary | Default summary (title) for newly created tickets. | (no default) |
default_type | Default type for newly created tickets. | defect |
default_version | Default version for newly created tickets. | (no default) |
restrict_owner | Make the owner field of tickets use a drop-down menu. Be sure to understand the performance implications before activating this option. See Assign-to as Drop-Down List. Please note that e-mail addresses are not obfuscated in the resulting drop-down menu, so this option should not be used if e-mail addresses must remain protected. | disabled |
workflow | Ordered list of workflow controllers to use for ticket actions. | ConfigurableTicketWorkflow |
[ticket-custom]
In this section, you can define additional fields for tickets. See TracTicketsCustomFields for more details.
[ticket-workflow]
The workflow for tickets is controlled by plugins. By default,
there's only a ConfigurableTicketWorkflow component in charge.
That component allows the workflow to be configured via this section
in the trac.ini file. See TracWorkflow for more details.
[timeline]
changeset_collapse_events | Whether consecutive changesets from the same author having exactly the same message should be presented as one event. That event will link to the range of changesets in the log view. | disabled |
changeset_long_messages | Whether wiki-formatted changeset messages should be multiline or not.
If this option is not specified or is false and | disabled |
changeset_show_files |
Number of files to show (
This can also be | 0 |
[trac]
anonymous_session_lifetime | Lifetime of the anonymous session, in days. Set the option to 0 to disable purging old anonymous sessions. (since 1.0.17) | 90 |
auth_cookie_lifetime | Lifetime of the authentication cookie, in seconds. This value determines how long the browser will cache authentication information, and therefore, after how much inactivity a user will have to log in again. The default value of 0 makes the cookie expire at the end of the browsing session. (since 0.12) | 0 |
auth_cookie_path | Path for the authentication cookie. Set this to the common base path of several Trac instances if you want them to share the cookie. (since 0.12) | (no default) |
auto_preview_timeout | Inactivity timeout in seconds after which the automatic wiki preview triggers an update. This option can contain floating-point values. The lower the setting, the more requests will be made to the server. Set this to 0 to disable automatic preview. (since 0.12) | 2.0 |
auto_reload | Automatically reload template files after modification. | disabled |
backup_dir | Database backup location | db |
base_url | Reference URL for the Trac deployment. This is the base URL that will be used when producing documents that will be used outside of the web browsing context, like for example when inserting URLs pointing to Trac resources in notification e-mails. | (no default) |
check_auth_ip | Whether the IP address of the user should be checked for authentication (since 0.9). | disabled |
database | Database connection string for this project | sqlite:db/trac.db |
debug_sql | Show the SQL queries in the Trac log, at DEBUG level. | disabled |
default_charset | Charset to be used when in doubt. | utf-8 |
default_date_format | The date format. Valid options are 'iso8601' for selecting ISO 8601 format, or leave it empty which means the default date format will be inferred from the browser's default language. (since 1.0) | (no default) |
default_dateinfo_format | The date information format. Valid options are 'relative' for displaying relative format and 'absolute' for displaying absolute format. (since 1.0) | relative |
default_handler | Name of the component that handles requests to the base URL.
Options include | WikiModule |
default_language | The preferred language to use if no user preference has been set. (since 0.12.1) | (no default) |
default_timezone | The default timezone to use | (no default) |
genshi_cache_size | The maximum number of templates that the template loader will cache in memory. You may want to choose a higher value if your site uses a larger number of templates, and you have enough memory to spare, or you can reduce it if you are short on memory. | 128 |
htdocs_location |
Base URL for serving the core static resources below
It can be left empty, and Trac will simply serve those resources itself.
Advanced users can use this together with
trac-admin ... deploy <deploydir> to allow serving the
static resources for Trac directly from the web server.
Note however that this only applies to the | (no default) |
ignore_auth_case | Whether login names should be converted to lower case (since 0.9). | disabled |
jquery_location | Location of the jQuery JavaScript library (version 1.11.3). An empty value loads jQuery from the copy bundled with Trac. Alternatively, jQuery could be loaded from a CDN, for example: http://code.jquery.com/jquery-1.11.3.min.js, http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.11.3.min.js or https://ajax.googleapis.com/ajax/libs/jquery/1.11.3/jquery.min.js. (since 1.0) | (no default) |
jquery_ui_location | Location of the jQuery UI JavaScript library (version 1.11.4). An empty value loads jQuery UI from the copy bundled with Trac. Alternatively, jQuery UI could be loaded from a CDN, for example: https://ajax.googleapis.com/ajax/libs/jqueryui/1.11.4/jquery-ui.min.js or http://ajax.aspnetcdn.com/ajax/jquery.ui/1.11.4/jquery-ui.min.js. (since 1.0) | (no default) |
jquery_ui_theme_location | Location of the theme to be used with the jQuery UI JavaScript library (version 1.11.4). An empty value loads the custom Trac jQuery UI theme from the copy bundled with Trac. Alternatively, a jQuery UI theme could be loaded from a CDN, for example: https://ajax.googleapis.com/ajax/libs/jqueryui/1.11.4/themes/start/jquery-ui.css or http://ajax.aspnetcdn.com/ajax/jquery.ui/1.11.4/themes/start/jquery-ui.css. (since 1.0) | (no default) |
mysqldump_path | Location of mysqldump for MySQL database backups | mysqldump |
never_obfuscate_mailto |
Never obfuscate | disabled |
permission_policies |
List of components implementing | ReadonlyWikiPolicy,DefaultPermissionPolicy,LegacyAttachmentPolicy |
permission_store |
Name of the component implementing | DefaultPermissionStore |
request_filters | Ordered list of filters to apply to all requests. | (no default) |
resizable_textareas |
Make | enabled |
secure_cookies | Restrict cookies to HTTPS connections.
When true, set the | disabled |
show_email_addresses | Show email addresses instead of usernames. If false, email addresses are obfuscated for users that don't have EMAIL_VIEW permission. | disabled |
show_full_names | Show full names instead of usernames. (since 1.2) | enabled |
show_ip_addresses | Show IP addresses for resource edits (e.g. wiki). Since 1.0.5 this option is deprecated and will be removed in 1.3.1. | disabled |
timeout | Timeout value for database connection, in seconds. Use '0' to specify no timeout. | 20 |
use_base_url_for_redirect |
Optionally use
In some configurations, usually involving running Trac behind
a HTTP proxy, Trac can't automatically reconstruct the URL
that is used to access it. You may need to use this option to
force Trac to use the | disabled |
use_chunked_encoding |
If enabled, send contents as chunked encoding in HTTP/1.1.
Otherwise, send contents with | disabled |
use_xsendfile |
When true, send a | disabled |
wiki_toolbars | Add a simple toolbar on top of Wiki <textarea>s. (since 1.0.2) | enabled |
xsendfile_header |
The header to use if | X-Sendfile |
[versioncontrol]
allowed_repository_dir_prefixes | Comma-separated list of allowed prefixes for repository directories when adding and editing repositories in the repository admin panel. If the list is empty, all repository directories are allowed. (since 0.12.1) | (no default) |
default_repository_type | Default repository connector type. This is used as the default repository type for repositories defined in the repositories section or using the "Repositories" admin panel. (since 0.12) | svn |
[wiki]
default_edit_area_height | Default height of the textarea on the wiki edit page. (Since 1.1.5) | 20 |
ignore_missing_pages | Enable/disable highlighting CamelCase links to missing pages. | disabled |
max_size | Maximum allowed wiki page size in characters. | 262144 |
render_unsafe_content |
Enable/disable the use of unsafe HTML tags such as For public sites where anonymous users can edit the wiki it is recommended to leave this option disabled. | disabled |
safe_origins |
List of URIs considered "safe cross-origin", that will be
rendered as To make any origins safe, specify "*" in the list. | data: |
safe_schemes |
List of URI schemes considered "safe", that will be rendered as
external links even if | cvs,file,ftp,git,irc,http,https,news,sftp,smb,ssh,svn,svn+ssh |
split_page_names | Enable/disable splitting the WikiPageNames with space characters. | disabled |
[components]
This section is used to enable or disable components provided by plugins, as well as by Trac itself. The component to enable/disable is specified via the name of the option. Whether its enabled is determined by the option value; setting the value to enabled or on will enable the component, any other value (typically disabled or off) will disable the component.
The option name is either the fully qualified name of the components or the module/package prefix of the component. The former enables/disables a specific component, while the latter enables/disables any component in the specified package/module.
Consider the following configuration snippet:
[components] trac.ticket.report.ReportModule = disabled webadmin.* = enabled
The first option tells Trac to disable the report module. The second option instructs Trac to enable all components in the webadmin package. Note that the trailing wildcard is required for module/package matching.
See the Plugins page on About Trac to get the list of active components (requires CONFIG_VIEW permissions.)
See also: TracPlugins
[ticket-custom]
In this section, you can define additional fields for tickets. See TracTicketsCustomFields for more details.
[ticket-workflow]
(since 0.11)
The workflow for tickets is controlled by plugins.
By default, there's only a ConfigurableTicketWorkflow component in charge.
That component allows the workflow to be configured via this section in the trac.ini file.
See TracWorkflow for more details.
[milestone-groups]
(since 0.11)
As the workflow for tickets is now configurable, there can be many ticket states, and simply displaying closed tickets vs. all the others is maybe not appropriate in all cases. This section enables one to easily create groups of states that will be shown in different colors in the milestone progress bar.
Example configuration (the default only has closed and active):
closed = closed # sequence number in the progress bar closed.order = 0 # optional extra param for the query (two additional columns: created and modified and sort on created) group=resolution,order=time,col=id,col=summary,col=owner,col=type,col=priority,col=component,col=severity,col=time,col=changetime # indicates groups that count for overall completion closed.overall_completion = truepercentage new = new new.order = 1 new.css_class = new new.label = new # one catch-all group is allowed active = * active.order = 2 # CSS class for this interval active.css_class = open # Displayed label for this group active.label = in progress
The definition consists in a comma-separated list of accepted status. Also, '*' means any status and could be used to associate all remaining states to one catch-all group.
The CSS class can be one of: new (yellow), open (no color) or
closed (green). New styles can easily be added using the following
selector: table.progress td.<class>
[svn:externals]
(since 0.11)
The TracBrowser for Subversion can interpret the svn:externals property of folders out of the box.
However, if those externals are not using the http: or https: protocol, or if a link to a different repository browser such as another Trac or ViewVC is desired, then Trac needs to be able to map an external prefix to this other URL.
This mapping is done in the [svn:externals] section of the TracIni
Example:
[svn:externals] 1 = svn://server/repos1 http://trac/proj1/browser/$path?rev=$rev 2 = svn://server/repos2 http://trac/proj2/browser/$path?rev=$rev 3 = http://theirserver.org/svn/eng-soft http://ourserver/viewvc/svn/$path/?pathrev=25914 4 = svn://anotherserver.com/tools_repository http://ourserver/tracs/tools/browser/$path?rev=$rev
With the above, the svn://anotherserver.com/tools_repository/tags/1.1/tools external will be mapped to http://ourserver/tracs/tools/browser/tags/1.1/tools?rev= (and rev will be set to the appropriate revision number if the external additionally specifies a revision, see the SVN Book on externals for more details).
Note that the number used as a key in the above section is purely used as a place holder, as the URLs themselves can't be used as a key due to various limitations in the configuration file parser.
Finally, the relative URLs introduced in Subversion 1.5 are not yet supported.
See also: TracGuide, TracAdmin, TracEnvironment
