Requirements

Since freeDiameter is extensible, the requirements may vary a lot depending on the extensions you are using. In this page, we are enumerating the requirements for the framework only, which are common to all freeDiameter nodes. You should in addition check the documentation of the extension(s) you are planning to use for any additional dependency or constraint. For example, for a backend server, the requirements will be probably higher that for a simple routing agent or client.

Hardware

By design, the Diameter protocol is quite demanding in terms of memory: for example, all requests that are sent must be kept until a corresponding answer is received. In addition, since communication channels must be protected either by TLS or IPsec, decent computational power is also required. For these reasons, a very small device such as small home gateway might not be suitable to run a backend server that authenticates a lot of users.

An average Desktop PC provides ample resources for the freeDiameter daemon, unless the message load is particularly high. Of course, the "real" application will probably have more severe requirements than the freeDiameter framework anyway (database, ...)

As a hint, it is reasonable to expect 5K to 10K messages per seconds throughput from freeDiameter stack on a standard Desktop PC, with TLS protection activated. Since the framework uses multi-threading, having several CPUs will increase the throughput almost linearly.

Operating system

freeDiameter source is written in C language and follows the POSIX API. It should run on any system that supports this API -- provided that other software dependencies can be met as well -- which mean most or all *NIX flavors. To date, freeDiameter has been compiled and tested on GNU/Linux distributions (Debian, Ubuntu, Fedora, OpenSUSE) and FreeBSD (8.2 and 8.3).

Since Microsoft Windows does not support the POSIX API, freeDiameter will not compile on this system. Some preliminary work has been made to compile with cygwin, but because the IPv6 support was not sufficient at that time, this environment is not supported.

Software dependencies

The system where freeDiameter will run must provide the following features:

Pthreads

The freeDiameter implementation is multi-threaded, the system must provide a (stable enough) POSIX threads support.

IPv6

The target system must support IPv6. Removing this requirement from freeDiameter would require a large change in the source code.

SCTP

It is also recommended that the system supports SCTP (with a recent version of the ​SCTP socket API extension), although freeDiameter can be compiled without SCTP by specifying a flag during cmake configuration (DISABLE_SCTP). Since the SCTP Socket API is not stable yet, it is quite difficult to provide a stable implementation which uses it... Hopefully, things will improve quickly...

GNUTLS

The framework uses this library for all TLS-related operations at the moment (may change due to ticket 19). This should not be a problem, since the ​gnutls library is available already on most platforms.

IDN

The framework uses the ​GNU libidn library to support Internationalized Domain Names processing. It is however possible to avoid this dependency by configuring the built with DIAMID_IDNA_IGNORE or DIAMID_IDNA_REJECT options.

As stated before, some extensions may have additional requirements (database backend, ...) that you should also check.

Building environment

In order to compile freeDiameter from sources, you will require some tools such as cmake, flex, ... Please refer to these files for up-to-date information:

• [source:freeDiameter/INSTALL INSTALL]: very general instruction on building freeDiameter.
• [source:freeDiameter/INSTALL.FreeBSD INSTALL.FreeBSD]: Detailed instruction for building on the FreeBSD platform.
• [source:freeDiameter/INSTALL.Ubuntu INSTALL.Ubuntu]: Detailed instructions for Debian and Ubuntu distributions.
• [source:freeDiameter/INSTALL.Fedora INSTALL.Fedora]: Detailed instructions for Fedora, CentOS, and other Red Hat based distributions.
• [source:freeDiameter/INSTALL.OpenSUSE INSTALL.OpenSUSE]: Detailed instructions for SUSE based distributions.
• [source:freeDiameter/INSTALL.OpenWRT INSTALL.OpenWRT]: Information for compiling freeDiameter for embedded devices with the OpenWRT operating system.

A note about the compiler: it is possible that some parts of the freeDiameter framework use non-standard GNU extensions, in particular for the debug facilities. gcc is known to compile the project, we have not tested different compilers at this time.

---